Internal Micrometers

Three-point internal Micrometers

	Self-centering 3-point for accurate measurement of internal diameters. Highly durable because of carbide-tipped contact points. Measurement can be taken closer to the bottom of the blind, and can be taken into a deep hole with an extension robs. Supplied with setting rings. Within 12mm/0.5": Resolution:0.01mm;0.001" Over 12mm/0.5" : Resolution:0.01mm;0.001" 1561A&1561B series Range 6~12mm 1561Cservies Range 12~100mm
1561

μ-Digit three-point internal Micrometers (IP54)

	Self-centering 3-point for accurate measurement of internal diameters. Measurement can be taken closer to the bottom of the blind, and can be taken into a deep hole with an extension robs. Carbide-tipped contact points. Protection level IP54. Criterion:DIN40050/IEC529. RS232 data output. Supplied with setting rings for zero adjust.
1563 (IP54)

Item No.			Range(mm)	Accuracy(mm)	Setting rings
1561-010	1562-010	1563-010	6~8	0.004	Φ8mm
1561-020	1562-020	1563-020	8~10		Φ8mm
1561-030	1562-030	1563-030	10~12		Φ10mm
1561-040	1562-040	1563-040	12~16		Φ16mm
1561-050	1562-050	1563-050	16~20		Φ16mm
1561-060	1562-060	1563-060	20~25		Φ25mm
1561-070	1562-070	1563-070	25~30		Φ25mm
1561-080	1562-080	1563-080	30~40		Φ40mm
1561-090	1562-090	1563-090	40~50	0.005	Φ40mm
1561-100	1562-100	1563-100	50~63		Φ62mm
1561-110	1562-110	1563-110	62~75		Φ62mm
1561-120	1562-120	1563-120	75~88		Φ87mm
1561-130	1562-130	1563-130	87~100		Φ87mm

Three-point internal Micrometers

	Self-centering 3-point for accurate measurement of internal diameters. Carbide-tipped contact points. Measurement can be taken closer to the bottom of the blind, and can be taken into a deep hole with an extension robs. Supplied with setting rings for zero adjust. Ratchet stop for exact repetitive readings.
1570
1571 (IP54)

Item No.		Range(mm)	Accuracy(mm)	Setting rings
1570-110	1571-110 (ip54)	50~70	0.004	Φ50mm
1570-120	1571-120 (ip54)	70~100	0.004	Φ70mm
1570-130	1571-130 (ip54)	100~150	0.005	Φ100mm
1570-140	1571-140 (ip54)	150~250	0.007	Φ150mm
1570-150	1571-150 (ip54)	200~300	0.007	Optional

	μ-Digit three-point internal Micrometers Large measuring range due to the patent structure and interchangeable measuring rods. High accuracy interchangeable measuring rods enable that reading does not have to be reset after changing rods. Resolution: 0.001mm; 0.0001"
1573

Electronic three-point internal Micromet Large measuring range due to the patent structure and interchangeable measuring rods. High accuracy interchangeable measuring rods enable that reading does not have to be reset after changing rods. Protection level IP54. Criterion:DIN40050/IEC529. RS232 data output.
	1574

Item No.		Range	Interchangeable measuring rods	Extension rods
1573-200	1573-200	200~500mm	3x50mm, 3x100mm	150mm, 500mm
1573-250	1573-250	500~1000mm	3x50mm, 3x100mm, 3x150mm, 3x200mm, 3x250mm, 3x330mm, 3x350mm	150mm, 500mm, 1000mm
1573-201	1573-201	8~20"	3x2", 3x4"	6", 20"
1573-251	1573-251	8~40"	3x2", 3x4", 3x6", 3x8", 3x10", 3x12", 3x14"	6", 20", 40"

pistol-grip three-point bore gages

	Single-hang operation, right- and left-hand viewing flexibility. Self-centering 3-point for accurate measurement of internal diameters. Measurement can be taken closer to the bottom of the blind, and can be taken into a deep hole with an extension robs. Carbide-tipped contact points. Supplied with setting rings for zero adjust. Fixing dimension of dial indicator:?8mm or 3/8" .
1579

Item No.		Range(mm)	Accuracy(mm)	Setting rings
Metric	Inch
1579-010	1579-011	6~8	0.004	Φ8mm
1579-020	1579-021	8~10		Φ8mm
1579-030	1579-031	10~12		Φ10mm
1579-040	1579-041	12~16		Φ16mm
1579-050	1579-051	16~20		Φ16mm
1579-060	1579-061	20~25		Φ25mm
1579-070	1579-071	25~30		Φ25mm
1579-080	1579-081	30~40		Φ40mm
1579-090	1579-091	40~50	0.005	Φ40mm
1579-100	1579-101	50~63		Φ62mm
1579-110	1579-111	62~75		Φ62mm
1579-120	1579-121	75~88		Φ87mm
1579-130	1579-131	87~100		Φ87mm

<top>