 |
 |
| TWO-JAW WEDGE-TYPE POWER CHUCKS |
|
|
| TWO-JAW WEDGE-TYPE POWER CHUCKS |
K50 -- TWO-JAW WEDGE-TYPE POWER
CHUCKS |
 |
Short cylindrical center mounting. Obtaining high gripping force and large jaw stroke by changing the lever ration. Suitable for plate,rod components. The jaws are connected by cross
tenon. |
 |
 |
| Dimension parameters |
| Size | D1 | D2 | d1 | H1 | H | h | B | B1 | z-d2 |
| 160 | 130 | 110 | M16 | 70 | 113 | 4 | 30 | 1 | 4-M12 |
| 200 | 165 | 130 | M20 | 80 | 131 | 4 | 36 | 2 | 4-M14 |
| 250 | 210 | 171.4 | M22 | 95 | 155 | 5 | 39 | 4 | 4-M16 |
| 320 | 270 | 235 | M24 | 105 | 177 | 6 | 45 | 7 | 4-M16 |
| Characteristic parameters |
|
Size |
XIAL WEDGE STROKE | Jaw stroke t(Dla.) | JMax.draw pull |
Gripping force |
Gripping force |
| 160 | 19 | 10 |
7.5 |
20-16 | 35-160 |
| 200 | 23 | 12 | 12 | 20-200 | 35-200 |
| 250 | 27 | 14 | 22 | 30-250 | 45-250 |
| 320 | 30 | 16 | 30 | 35(50)-320 | 50(65)-320 |
| Note:The()on the above table is for K50B chuck. |